Next time when you’re getting your energy bill for using all that hot water doesn’t act surprised. You don’t have any excuse for paying so much when almost everybody around you switched to tankless water heaters decades ago.
Joke aside, the tankless water heaters have been on the market for some time now, with the ability to cut down your energy bill being their selling point.
Page Table of Contents
Why should you turn to tankless water heaters?
The fundamental principle for tankless water heaters is that they give hot water on demand, until the end of time. They don’t have a tank to collect the boiling water and don’t use energy for maintaining the water hot. No tank and no fuel when not in use result in less energy consumed, which reduces your energy bill from the very first month.
Since the water only goes through the system and doesn’t collect in a tank, it doesn’t have the time to cause damage or corrosion to the system. Minerals such as calcium and magnesium are harsh on pipes, especially if your water is hard. Just because water doesn’t get to stay in the system, doesn’t mean you shouldn’t protect the unit, nevertheless. Be cautious and also install a water softener for your tankless water heater, for expanding the durability.
It brings us to the next benefit of tankless water heaters, which is low maintenance. There’s no tank to take care of, and the majority of tankless water heaters only require some flushing once a year.
You may think that we got over all the benefits, but we’re not there yet. No tank also means less space needed for the installation. Tankless water heaters are small, compact, and only need 1/3 of the area that traditional water heaters with tanks may need.
Highly energy-efficient and dependable, tankless water heaters are an excellent investment for anyone living in the 21st century. The high price of gas models and professional installation (by a licensed plumber) are problems to consider. However, none of them should stop you from switching to tankless water heaters asap.
What’s the brief description of Takagi T-H3-DV-N Condensing Indoor?
Takagi T-H3-DV-N Condensing Indoor is made for both residential and commercial applications. It can ideally sustain a beauty salon or an intimate restaurant.
Takagi is a Japanese manufacturer that designs and makes various types of indoor water heaters. Takagi T-H3-DV-N Condensing Indoor is an indoor model that handles heavy-duty jobs pretty well. When installed in cold regions, it can sustain three showers and faucets simultaneously. Its build allows even installation in high altitude locations, with an impressive performance at 10,000ft elevation.
Capable of measuring the groundwater temperature, Takagi T-H3-DV-N Condensing Indoor is a versatile and fantastic unit. You can include it in recirculation systems, hydronic heating systems, storage tanks, radiant floor systems, and more.
The easy-link ability lets you connect four units at the same time. When using the multi-unit controller, you can even link 20 units, which renders Takagi T-H3-DV-N Condensing Indoor to be an excellent investment for any business.
Let’s have a closer look at the technical specifications!
Takagi T-H3-DV-N Condensing Indoor is a reliable option for large household and commercial applications with high water demands. The unit is made according to the Ultra-Low NOx regulations and comes with commercial-grade copper alloy for the heat exchanger tubing. Thanks to its build, the water heater can handle heavy-duty residential applications such as space heating and domestic recirculation systems. It can work correctly in locations up to 10,100ft altitude.
The unit has a compact shape and doesn’t need much space for mounting.
Going back to the heat exchanger, let’s highlight that the primary heat exchange is made with a commercial-grade alloy, which ensures 25 times better heat transfer than stainless steel. The secondary heat exchanger uses 316L stainless steel, which improves corrosion resistance.
Many are impressed by the computerized safety features that prevent any accidents when using the unit. Protection against the freeze, overheat, and surge, but also the troubleshooting diagnostic codes ensure the secure operation of the water heater at all times. For instance, the overheat function will cut off the fuse and manage the heating system when the temperature is too high. The AFR (Air-Fuel Ratio) is the new version of the sensor that triggers the overheat protection. Plus, there is no pilot light to worry about in case of a particular operation.
Takagi T-H3-DV-N Condensing Indoor is a sturdy unit that may deliver 10GPM, which is quite impressive when compared to typical electric water heaters. Performance isn’t altered by the elevation of locations, due to the features and build of the water heater.
Speaking of which, Takagi T-H3-DV-N Condensing Indoor heats the water continually with minimal risk for fluctuations. Should the device identify cold water, it’s going to operate the gas in the heat exchanger and internal burners for completing the heating. The gas output ranges between 19,500 and 199,000 BTUs. Virtually and practically, the unit is going to give you an endless hot water supply.
Takagi T-H3-DV-N Condensing Indoor features innovative water condensing technology, pushing out the elements during the heating.
Thanks to the Easy-Link feature, you may connect several units. Don’t forget that you can link 20 units with a Multi-Controller.
The unit comes with built-in controls and power cord, which ease out the operation. Versatility isn’t skipped, with venting taking Schedule 40PVC, PP, CPVC, and Category III stainless steel.
You need to use a non-return valve for the venting system, which is going to prevent the combustion gas coming out through the non-operating appliances. A concentric PVC termination is also necessary for the direct-vent system for a more comfortable installation. You only need to make a single penetration through the sidewall and not two penetrations for the intake and exhaust piping.
Takagi T-H3-DV-N Condensing Indoor is Energy Star qualified and comes with a 15-year warranty limited for the heat exchanger and 5-year limited for the parts in case of residential use. For commercial applications, the heat exchanger and the elements have a 5-year limited warranty. The unit is NSF certified for industrial applications.
Is the list of functional aspects long?
There are many positive aspects related to Takagi T-H3-DV-N Condensing Indoor, and sticking to a shortlist is quite tricky.
- It’s a dependable unit for both residential and commercial applications
- It’s sturdy and long-lasting
- It can work up to 10,100ft elevation
- Several safety features ensure secure use
- The Easy-Link feature allows connection of four units
- The Multi-Controller lets you link 20 units
- You may choose from various venting options, for more versatility
- It’s easy to install and to operate
Are there any problems?
We don’t see the inherent issues as deal breakers, but it’s only fair that we list the downsides as well:
- It’s not the lightest tankless water heater
- It doesn’t come with remote control
- It’s not the cheapest model
What’s our final take on the unit?
Regardless of the minor issues, Takagi T-H3-DV-N Condensing Indoor is a robust and dependable model for most commercial applications. It handles residential use in a large household and allows connection of even 20 units. You can rely on its performance and not stress about the minor pet peeves since Takagi T-H3-DV-N Condensing Indoor is an excellent investment on any given day.