Goodman Furnace Circuit Board Cost

Modern furnaces come with many features that save customers from all sorts of problems. Days, when only technicians could troubleshoot your furnace are long gone; new models like Goodman furnaces come with features that help even the less skilled homeowner identify their unit’s problem.

We’re not saying that once the problem is identified, the house owner will also solve it and fix it. However, today’s customers benefit from technology that makes operation and troubleshooting of the furnaces a lot less complicated.

One of the features easing out homeowners’ lives today is the control circuit board that controls the ignitor and has warning lights with led indicators. These indicators will tell you about various issues with the furnace. Goodman furnaces are great, but furnaces have to take a lot of wear and tear (they start and run continuously). The risk for issues is never null, and the furnace’s circuit board doesn’t make an exception.

What if you experience a Goodman furnace circuit board problem?

Several signs will tell you that the circuit board has developed issues, but it’s not always a necessary replacement.

Older models would come with ignition control boards that would monitor the valve, ignitor, and the flame sensing circuits. Should your furnace be old, it’s better to replace it altogether as new models have higher energy efficiency.

Modern units come with built-in circuit boards that may also monitor the furnace’s blower, along with the other functions as older models would.

It’s not very complicated to become aware of an improperly operating furnace, especially since many of the issues won’t go unnoticed for a long time. A circuit board not properly running may cause some of the following situations:

Interruptions in the operation

All furnace control boards have to go through several phases when running. For example, the operation should begin with turning on the induced draft motor, and continue right away with the pressure switch’s closure. Once you notice that the ignition hasn’t switched on, but the blower doesn’t stop running after the elements have ceased to run, you will have to call the professional. Repair may be possible, but replacing it is the safest solution.

Warning lights

The led indicators on your Goodman circuit panel will tell you something’s wrong with the circuit board. A red light is pretty alarming, so don’t postpone fixing/replacement.

The temperature fluctuates all the time.

As the temperature inside your house is too hot or too cold, it’s quite evident that your furnace doesn’t run properly anymore. If there’s nothing wrong with the thermostat, the circuit board can cause the temperature fluctuation.

Many of the furnace’s problems are easy to notice, and the circuit board will let you know what’s the problem. But circuit boards can also develop issues, and replacement could be the only solution.

Is it expensive to replace the furnace’s circuit board?

Furnace circuit board prices begin at $50, but they can go as high as $250, depending on the model. It’s the replacement that makes the higher spending, as professional help may be needed. Most of the time, replacing the circuit board ranges from $400 to $700.

Some customers will be tempted to do the replacement independently, as there are so many tutorials online. Moreover, if you don’t have the skills and the experience, you shouldn’t attempt replacing the circuit board. Here are some reasons for which replacing the circuit board on your own is a tricky job:

• Begin with making sure that you have to replace the circuit board. It may seem effortless, but many times only the HVAC tech will decide if the circuit board is beyond repair or he/she can fix it.
• Take a look at the led flashing the error codes. Check the codes on the panel door or somewhere else; if the circuit board is the problem, the error codes should tell you that.
• You always have to buy the proper circuit board. It’s not that there aren’t many places to buy it from (you can find it online), but you also have to purchase the correct model. The part number from your current circuit board has to match with the new board. The new circuit board should have the same name or check your furnace.
• Furnaces are different between manufacturers so that directions could also be different.

Last piece of advice

Even if circuit boards aren’t expensive per se, especially when it comes to models for your Goodman furnace, be ready to pay the extra buck for the professional making the replacement.

Many customers are tempted to replace the circuit board independently; if you have the patience, skills, and time to follow every step, meticulously is fundamental, nevertheless.